Olson Saw Blade Selection Guide - Scroll Saw, Coping, Jewelers

Saw Blade Selection Guide

Scroll Saw, Coping, Jewelers & Mini Hack Blades -- Manufacturing in the USA since 1918

How to Use This Guide

This interactive chart covers Olson scroll saw, coping, and jewelers blades with specs, material recommendations, and direct links to our shop. Use the tabs below to switch between blade categories.

Choose a Category
Use the tabs to switch between Scroll Saw, Coping, and Jewelers/Mini Hack blades.

Filter and Search
Use the dropdowns to filter by blade type or material. Type in the search box to find a specific SKU.

Click the + for Full Details
Click any row to expand it and see application info, special features, material compatibility, and links to buy in various pack sizes.

Material Compatibility: Recommended Can Use Not Recommended

Blade Type

Material to Cut

Sort

	SKU	Univ #	Type	Length	Width"	Thick"	TPI	End	Finish

Olson coping saw blades are 6-1/2" long between pins and fit all standard coping saw frames. Made from the finest hardened and tempered spring or high carbon steel with precision punched or milled teeth for accurate sawing, smooth finishes, and longer life. For precise sawing of wood, plastic, copper, and other soft metals.

	SKU	Length	Width"	Thick"	TPI	Finish	Application

Premium quality jewelers metal piercing blades are made of hardened and tempered steel for sawing metal and other hardened materials. Use with hand-held jewelers saw frames. Mini hack saw blades fit junior hack saw frames for cutting wood, plastic, and metal.

	SKU	Type	Univ #	Length	Width"	Thick"	TPI	Application

Quick Tips

Reverse Tooth blades work best with 1 to 2 reverse teeth showing above the table on the upstroke. Adjust blade in holder or trim when necessary.

Tension blade properly! With reasonable force the center of the blade should not move more than 1/8" front to back. Too little tension weakens performance.

More TPI give a finer cut (good for soft wood). Fewer TPI provide a coarser cut (good for hard wood). Use the highest number blade for your application.

Slow your feed rate! Let the blade do the cutting to minimize burning. Use a lube stick on the blade or clear shipping tape on the workpiece to inhibit scorching.

For best performance, use lower universal numbers for thinner stock and tighter radii, and higher numbers for thicker stock and more general purpose cuts.

Olson Saw Company -- A Division of Blackstone Industries LLC -- Danbury, CT 06811 USA -- 800-272-2885 -- olsonsaw.net

Full Blade Specification List

The complete data behind the blade selection guide above in plain text: every Olson scroll saw, coping saw, and jewelers blade with full specs, applications, material recommendations, and links to shop each SKU.

View the full list ▾Collapse the list ▴

Olson Scroll Saw Blade Chart (Complete List)

Every Olson scroll saw blade with SKU, universal number, length, width, thickness, teeth per inch, end type, finish, applications, and material recommendations - PGT, Mach Speed, Crown Tooth, Reverse Tooth, Skip Tooth, Double Tooth, Regular Tooth, Spiral, Thick Wood Hook, and pin end blades.

PGT Skip/Reverse Scroll Saw Blades

SKU	Universal #	Length	Width (in)	Thickness (in)	TPI	End Type	Finish	Application & Features	Materials
PG45502	5RG	5"	0.044	0.018	12/9 Rev	Plain	smooth	Steady, close radius cutting in materials 3/16" or thicker. Best for soft wood. Precision ground razor sharp reverse teeth with widely spaced gullets. Cuts straighter, faster, smoother, more accurately. Minimizes burning. Sand-free, splinterless finish with clean edges.	Recommended: Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Hardwood 1/2"-3/4", Corian 1/8"-1/2".
PG45702	7RG	5"	0.046	0.018	10/7 Rev	Plain	smooth	Steady, close radius cutting in materials 1/4" or thicker. For both soft and hardwood. Precision ground razor sharp reverse teeth with widely spaced gullets. Cuts straighter, faster, smoother, more accurately. Minimizes burning. Sand-free, splinterless finish with clean edges.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Hardwood to 1-1/2", Corian 1/8"-1/2", Plastic 1/2"-3/4".
PG45902	9RG	5"	0.048	0.018	8/6 Rev	Plain	smooth	Fast, close radius cutting in materials 1/2" or thicker. Best for hardwood. Precision ground razor sharp reverse teeth with widely spaced gullets. Cuts straighter, faster, smoother, more accurately. Minimizes burning. Sand-free, splinterless finish with clean edges.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Corian 1/8"-1/2", Plastic 1/2"-3/4".

PGT Double/Reverse Scroll Saw Blades

SKU	Universal #	Length	Width (in)	Thickness (in)	TPI	End Type	Finish	Application & Features	Materials
PG49502	5RG	5"	0.045	0.018	12.5/8 Rev	Plain	smooth	Accurate, tight radius cutting in materials 3/16" or thicker. Double tooth style especially good for cutting hardwoods. Reverse teeth for clean, sharp edges on top and bottom. The best scroll saw blades available. 3 to 4 times cutting life.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood, MDF, Particle Board. Can use: Hardwood to 1-1/2", Softwood to 1-1/2", Corian 1/8"-1/2".
PG49702	7RG	5"	0.047	0.018	10.5/8 Rev	Plain	smooth	Steady, close radius cutting in materials 1/4" or thicker. Double tooth style especially good for cutting hardwoods. Reverse teeth for clean, sharp edges on top and bottom. The best scroll saw blades available. 3 to 4 times cutting life.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Corian 1/8"-1/2", Plastic 1/2"-3/4".
PG49902	9RG	5"	0.049	0.018	9/6 Rev	Plain	smooth	Fast, close radius cutting in materials 1/2" or thicker. Double tooth style especially good for cutting hardwoods. Reverse teeth for clean, sharp edges on top and bottom. The best scroll saw blades available. 3 to 4 times cutting life.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Corian 1/8"-1/2", Plastic 1/2"-3/4".

Mach Speed Scroll Saw Blades

SKU	Universal #	Length	Width (in)	Thickness (in)	TPI	End Type	Finish	Application & Features	Materials
FR64302	3R	5"	0.032	0.014	13/7 Skip Rev	Plain	splinter-free	Accurate, tight radius cuts in hard/soft wood 3/16"+. Skip tooth blade, precision milled with widely spaced gullets that minimize burning and provide rapid chip removal. Reverse teeth cut on upstroke and eliminate underside tearout.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4". Can use: Veneer/Thin Wood, Plywood, MDF.
FR64502	5R	5"	0.038	0.016	13/7 Skip Rev	Plain	splinter-free	Steady, close radius cuts in hard/soft wood 1/4"+. Skip tooth blade, precision milled with widely spaced gullets that minimize burning and provide rapid chip removal. Reverse teeth cut on upstroke and eliminate underside tearout.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood. Can use: Hardwood to 1-1/2", Softwood to 1-1/2", MDF.
FR64702	7R	5"	0.046	0.017	8/6 Skip Rev	Plain	splinter-free	Fast, close radius cuts in hard/soft wood 1/2"+. Skip tooth blade, precision milled with widely spaced gullets that minimize burning and provide rapid chip removal. Reverse teeth cut on upstroke and eliminate underside tearout.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF. Can use: Particle Board.
FR64902	9R	5"	0.055	0.018	8/6 Skip Rev	Plain	splinter-free	Fast, close radius cuts in hard/soft wood 5/8"+. Skip tooth blade, precision milled with widely spaced gullets that minimize burning and provide rapid chip removal. Reverse teeth cut on upstroke and eliminate underside tearout.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF. Can use: Particle Board.

Crown Tooth Scroll Saw Blades

SKU	Universal #	Length	Width (in)	Thickness (in)	TPI	End Type	Finish	Application & Features	Materials
CT62000	2/0	5"	0.024	0.011	20	Plain	splinter-free	Veining, line art, extreme radius cutting. Cuts on BOTH up and down strokes! Two-way cutting provides smooth, splinterless finish and clean edges. No top or bottom for easy installation. Can be flipped for a fresh set of teeth. Prevents melting in most plastics.	Recommended: Veneer/Thin Wood. Can use: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood, MDF, Plastic 1/2"-3/4".
CT62200	2	5"	0.026	0.013	20	Plain	splinter-free	Extreme radius, delicate fretwork. Cuts on BOTH up and down strokes! Two-way cutting provides smooth, splinterless finish and clean edges. No top or bottom for easy installation. Can be flipped for a fresh set of teeth. Prevents melting in most plastics.	Recommended: Softwood 1/2"-3/4", Veneer/Thin Wood. Can use: Hardwood 1/2"-3/4", Plywood, MDF, Plastic 1/2"-3/4".
CT62300	3	5"	0.032	0.014	16	Plain	splinter-free	Tight radius fretwork. Cuts on BOTH up and down strokes! Two-way cutting provides smooth, splinterless finish and clean edges. No top or bottom for easy installation. Can be flipped for a fresh set of teeth. Prevents melting in most plastics.	Recommended: Softwood 1/2"-3/4", Plywood, MDF. Can use: Hardwood 1/2"-3/4", Veneer/Thin Wood, Corian 1/8"-1/2", Plastic 1/2"-3/4".
CT62500	5	5"	0.038	0.016	16	Plain	splinter-free	Close radius fretwork, general purpose. Cuts on BOTH up and down strokes! Two-way cutting provides smooth, splinterless finish and clean edges. No top or bottom for easy installation. Can be flipped for a fresh set of teeth. Prevents melting in most plastics.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood, MDF. Can use: Softwood to 1-1/2", Particle Board, Corian 1/8"-1/2", Plastic 1/2"-3/4".
CT62700	7	5"	0.045	0.017	11	Plain	splinter-free	Close radius, general purpose. Cuts on BOTH up and down strokes! Two-way cutting provides smooth, splinterless finish and clean edges. No top or bottom for easy installation. Can be flipped for a fresh set of teeth. Prevents melting in most plastics.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Hardwood to 1-1/2", Corian 1/8"-1/2", Plastic 1/2"-3/4".
CT62900	9	5"	0.053	0.018	6	Plain	medium	General purpose, multi-layers. Cuts on BOTH up and down strokes! Two-way cutting provides smooth, splinterless finish and clean edges. No top or bottom for easy installation. Can be flipped for a fresh set of teeth. Prevents melting in most plastics.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Hardwood to 1-1/2", Corian 1/8"-1/2", Plastic 1/2"-3/4".
CT63200	12	5"	0.065	0.024	6	Plain	medium	Heavy duty for faster cuts. Cuts on BOTH up and down strokes! Two-way cutting provides smooth, splinterless finish and clean edges. No top or bottom for easy installation. Can be flipped for a fresh set of teeth. Prevents melting in most plastics.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Corian 1/8"-1/2", Plastic 1/2"-3/4".

Reverse Tooth Scroll Saw Blades

SKU	Universal #	Length	Width (in)	Thickness (in)	TPI	End Type	Finish	Application & Features	Materials
FR44002	2/0R	5"	0.026	0.011	28/21 Rev	Plain	splinter-free	Veining, line art, extreme radius cutting. Skip style teeth with reverse teeth that eliminate underside tearout. Smooth, splinter-free finish on top and bottom. Excellent for eliminating tear-out on birch and maple plywood.	Recommended: Softwood 1/2"-3/4", Veneer/Thin Wood. Can use: Hardwood 1/2"-3/4", Plywood, Non-Ferrous Metal.
FR44302	2R	5"	0.029	0.012	20/14 Rev	Plain	splinter-free	Extreme radius, delicate fretwork. Skip style teeth with reverse teeth that eliminate underside tearout. Smooth, splinter-free finish on top and bottom. Excellent for eliminating tear-out on birch and maple plywood.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Veneer/Thin Wood, Plywood. Can use: MDF, Non-Ferrous Metal.
FR44602	5R	5"	0.038	0.016	12.5/9 Rev	Plain	splinter-free	Close radius fretwork, general purpose. Skip style teeth with reverse teeth that eliminate underside tearout. Smooth, splinter-free finish on top and bottom. Excellent for eliminating tear-out on birch and maple plywood.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood, MDF. Can use: Hardwood to 1-1/2", Softwood to 1-1/2", Particle Board.
FR44802	7R	5"	0.047	0.017	11.5/8 Rev	Plain	splinter-free	Close radius, general purpose. Skip style teeth with reverse teeth that eliminate underside tearout. Smooth, splinter-free finish on top and bottom.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Corian 1/8"-1/2".
FR45002	9R	5"	0.054	0.019	11.5/8 Rev	Plain	splinter-free	General purpose, multi-layers. Skip style teeth with reverse teeth that eliminate underside tearout. Smooth, splinter-free finish on top and bottom.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Corian 1/8"-1/2", Plastic 1/2"-3/4".
FR45302	12R	5"	0.062	0.024	9.5/6 Rev	Plain	medium	Heavy duty for faster cuts. Skip style teeth with reverse teeth that eliminate underside tearout.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Corian 1/8"-1/2", Plastic 1/2"-3/4".
FR42002	--	5"	0.1	0.022	9/5 Rev	Plain	medium	Thick wood and multi-layers. Aggressive, fast cutting. Extra wide for heavy duty cutting of thick stock up to 2 inches. Reverse teeth eliminate underside tearout.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Corian 1/8"-1/2", Plastic 1/2"-3/4".
FR42003	--	5"	0.1	0.018	9/5 Rev	Pin End	splinter-free	Heavy duty widely-spaced set teeth for fast cutting with splinter-free finish. For pin end scroll saws. Reverse skip tooth for splinter-free finish on top and bottom. For machines requiring 5" pin end blades.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Plastic 1/2"-3/4".

Skip Tooth Scroll Saw Blades

SKU	Universal #	Length	Width (in)	Thickness (in)	TPI	End Type	Finish	Application & Features	Materials
FR40000	3/0	5"	0.022	0.008	33	Plain	smooth	Ultra intricate sawing, veining, line art, jig saw puzzles. Fast cuts with good chip clearance. Can cut cold rolled steel, copper, brass, aluminum sheet and bronze up to 1/8" thick.	Recommended: Veneer/Thin Wood, Non-Ferrous Metal. Can use: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plastic 1/2"-3/4", Aluminum.
FR44000	2/0	5"	0.022	0.01	28	Plain	smooth	Extremely intricate sawing, veining, line art. Fast cuts with good chip clearance. Can cut cold rolled steel, copper, brass, aluminum.	Recommended: Softwood 1/2"-3/4", Veneer/Thin Wood, Non-Ferrous Metal. Can use: Hardwood 1/2"-3/4", Plastic 1/2"-3/4", Aluminum.
FR44300	2	5"	0.029	0.012	20	Plain	smooth	Tight radius work, fretwork. Fast cuts with good chip clearance and smooth finishes.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Veneer/Thin Wood, Non-Ferrous Metal. Can use: Plywood, Plastic 1/2"-3/4", Aluminum.
FR44500	4	5"	0.035	0.015	15	Plain	smooth	Tight radius work, fretwork. Fast cuts with good chip clearance and smooth finishes.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood. Can use: Softwood to 1-1/2", Veneer/Thin Wood, MDF, Plastic 1/2"-3/4", Non-Ferrous Metal.
FR44600	5	5"	0.038	0.016	12.5	Plain	smooth	Close radius cutting. Fast cuts with good chip clearance and smooth finishes.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood, MDF. Can use: Hardwood to 1-1/2", Softwood to 1-1/2", Particle Board, Plastic 1/2"-3/4".
FR44800	7	5"	0.045	0.017	11.5	Plain	smooth	General purpose. Popular for cutting hard and soft woods 3/16" up to 2". Also cuts plastic, paper, felt, bone.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Corian 1/8"-1/2", Plastic 1/2"-3/4".
FR45000	9	5"	0.053	0.018	11.5	Plain	smooth	General purpose. Popular for cutting hard and soft woods 3/16" up to 2". Also cuts plastic, paper, felt, bone.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Corian 1/8"-1/2", Plastic 1/2"-3/4".
FR45300	12	5"	0.062	0.024	9.5	Plain	medium	Heavy duty, fast cuts. Heavy duty blade for thicker stock. Good chip clearance.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Corian 1/8"-1/2", Plastic 1/2"-3/4".
FR410DZ	--	5"	0.11	0.022	7	Plain	medium	Heavy duty for fast cutting of thick wood and multi-layers. Extra wide skip tooth blade for aggressive cutting of thick stock. Wide gullets for rapid chip removal.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Plastic 1/2"-3/4".
FR42901	--	3"	0.068	0.014	18.5	Pin End	smooth	Skip style teeth for rapid chip removal in wood and plastic. For hobby scroll saws requiring 3" pin end blades. For machines requiring 3" pin end blades. Skip teeth for rapid chip removal. Narrow width for tight turning.	Recommended: Softwood 1/2"-3/4". Can use: Hardwood 1/2"-3/4", Veneer/Thin Wood, Plastic 1/2"-3/4".
FR10180	--	4"	0.074	0.01	18	Pin End	smooth	Thin cuts in wood and plastic. For Dremel Moto-Saw and similar small scroll saws requiring 4" pin end blades. For Dremel Moto-Saw and machines requiring 4" (3.9" between pins) pin end blades. Skip tooth for fast cutting.	Recommended: Softwood 1/2"-3/4". Can use: Hardwood 1/2"-3/4", Veneer/Thin Wood, Plastic 1/2"-3/4".
FR42401	--	5"	0.07	0.01	18.5	Pin End	smooth	Skip style teeth for very thin cuts in material 3/32" to 1/2" thick. For machines requiring 5" pin end blades. Perfect for Sears Craftsman, Penn State, Delta, Ryobi, and all 15" and 16" imported scroll saws.	Recommended: Softwood 1/2"-3/4". Can use: Hardwood 1/2"-3/4", Veneer/Thin Wood, Plastic 1/2"-3/4".

Double Tooth Scroll Saw Blades

SKU	Universal #	Length	Width (in)	Thickness (in)	TPI	End Type	Finish	Application & Features	Materials
DT43200	3/0	5"	0.023	0.008	33	Plain	smooth	Extremely intricate sawing, veining, line cutting and wood veneer. Two teeth together followed by a flat space for efficient chip removal. Considered the BEST blade for cutting wood veneer!	Recommended: Veneer/Thin Wood. Can use: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plastic 1/2"-3/4".
DT43300	2/0	5"	0.024	0.011	37	Plain	smooth	Veining, line art and marquetry. Two teeth together followed by a flat space for efficient chip removal. Cut fast leaving clean edges.	Recommended: Veneer/Thin Wood. Can use: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plastic 1/2"-3/4".
DT43400	1	5"	0.026	0.013	30	Plain	smooth	Delicate fretwork. Two teeth together followed by a flat space for efficient chip removal. Cut fast leaving clean edges.	Recommended: Softwood 1/2"-3/4", Veneer/Thin Wood. Can use: Hardwood 1/2"-3/4", Plywood, Plastic 1/2"-3/4".
DT43500	3	5"	0.032	0.014	23	Plain	smooth	Extremely intricate sawing. Two teeth together followed by a flat space for efficient chip removal. Cut fast leaving clean edges.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood. Can use: Veneer/Thin Wood, MDF, Plastic 1/2"-3/4".
DT43600	5	5"	0.038	0.016	16	Plain	smooth	Tight radius work. Two teeth together followed by a flat space for efficient chip removal. Cut fast leaving clean edges.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood, MDF. Can use: Hardwood to 1-1/2", Softwood to 1-1/2", Particle Board, Plastic 1/2"-3/4".
DT43700	7	5"	0.044	0.018	13	Plain	smooth	Close radius cutting. Two teeth together followed by a flat space for efficient chip removal. Cut fast leaving clean edges.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Plastic 1/2"-3/4".
DT43800	9	5"	0.053	0.018	11	Plain	medium	General purpose. Two teeth together followed by a flat space for efficient chip removal. Cut fast leaving clean edges.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Corian 1/8"-1/2", Plastic 1/2"-3/4".
DT43900	12	5"	0.061	0.022	10	Plain	medium	Heavy duty, fast cuts. Two teeth together followed by a flat space for efficient chip removal. Cut fast leaving clean edges.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board. Can use: Corian 1/8"-1/2", Plastic 1/2"-3/4".

Regular Tooth Scroll Saw Blades

SKU	Universal #	Length	Width (in)	Thickness (in)	TPI	End Type	Finish	Application & Features	Materials
SC402DZ	--	5"	0.049	0.022	25	Plain	smooth	Tight radius cuts in wood. Fine, equally spaced teeth for precise internal and external cutting of irregular shapes and straight cut-off in all types of sheet materials. Ideal for spring tension scroll saws.	Recommended: Softwood 1/2"-3/4", Veneer/Thin Wood. Can use: Hardwood 1/2"-3/4".
SC403DZ	--	5"	0.07	0.023	20	Plain	medium	Wood from 3/32" to 1/4" thick. Medium smooth finish. Fine, equally spaced teeth for precise internal and external cutting. Ideal for spring tension scroll saws.	Recommended: Softwood 1/2"-3/4", Veneer/Thin Wood. Can use: Hardwood 1/2"-3/4", Plywood, Plastic 1/2"-3/4".
SC405DZ	--	5"	0.1	0.022	20	Plain	medium	Hard and soft wood. Medium smooth finish. Fine, equally spaced teeth for precise internal and external cutting. Also available in 6" length for scroll saws with longer stroke.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood. Can use: Softwood to 1-1/2", MDF, Plastic 1/2"-3/4".
SC406DZ	--	5"	0.25	0.025	20	Plain	medium	Mica and non-ferrous metal. Medium smooth finish. Fine, equally spaced teeth. Wide blade for cutting mica, lead, copper, brass, aluminum, pewter.	Recommended: Non-Ferrous Metal, Aluminum.
SC411DZ	--	5"	0.1	0.022	15	Plain	medium	Wallboard, pressed wood, felt, paper, bone, lead. Medium smooth finish. Equally spaced teeth for precise cutting. Also available in 6" length for scroll saws with longer stroke.	Recommended: Softwood 1/2"-3/4", Plywood, MDF. Can use: Hardwood 1/2"-3/4", Softwood to 1-1/2", Particle Board, Plastic 1/2"-3/4", Non-Ferrous Metal.
SC412DZ	--	5"	0.1	0.022	10	Plain	medium	Hard/soft wood from 1/4" to 3/4" and plastic. Medium finish. Equally spaced teeth for precise cutting. Also available in 6" length for scroll saws with longer stroke.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood, MDF. Can use: Softwood to 1-1/2", Particle Board, Plastic 1/2"-3/4".
SC413DZ	--	5"	0.187	0.025	10	Plain	medium	Wood from 1/4" to 3/4" thick. Equally spaced teeth. Also available in 6" length for scroll saws with longer stroke.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood, MDF. Can use: Softwood to 1-1/2", Particle Board, Plastic 1/2"-3/4".
SC414DZ	--	5"	0.25	0.025	7	Plain	medium	Wood and plastic 1/4" to 3/4" thick. Wide blade with equally spaced teeth for faster cutting of thicker stock.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board, Plastic 1/2"-3/4". Can use: Hardwood to 1-1/2".
SC405-6DZ	--	6"	0.1	0.022	20	Plain	medium	Hard and soft wood. For scroll saws with longer stroke (over 1-1/4") and for cutting stock more than 2" thick. 6" long blades for scroll saws with a longer stroke. Equally spaced teeth for precise internal and external cutting of irregular shapes and straight cut-off.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood. Can use: Hardwood to 1-1/2", Softwood to 1-1/2", MDF, Plastic 1/2"-3/4".
SC411-6DZ	--	6"	0.1	0.022	15	Plain	medium	Wallboard, pressed wood, felt, paper, bone, lead. For scroll saws with longer stroke. 6" long blades for scroll saws with a longer stroke. Equally spaced teeth for precise cutting.	Recommended: Softwood 1/2"-3/4", Plywood, MDF. Can use: Hardwood 1/2"-3/4", Softwood to 1-1/2", Particle Board, Plastic 1/2"-3/4", Non-Ferrous Metal.
SC412-6DZ	--	6"	0.1	0.022	10	Plain	medium	Hard/soft wood from 1/4" to 3/4" and plastic. For scroll saws with longer stroke. 6" long blades for scroll saws with a longer stroke. Equally spaced teeth for precise cutting.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood, MDF. Can use: Softwood to 1-1/2", Particle Board, Plastic 1/2"-3/4".
SC413-6DZ	--	6"	0.187	0.025	10	Plain	medium	Wood from 1/4" to 3/4" thick. For scroll saws with longer stroke. 6" long blades for scroll saws with a longer stroke. Equally spaced teeth for precise cutting.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood, MDF. Can use: Softwood to 1-1/2", Particle Board, Plastic 1/2"-3/4".
SC429PDZ	--	3"	0.068	0.01	25	Pin End	smooth	Fine cuts in hard/soft wood and plastic. For hobby scroll saws requiring 3" pin end blades. For machines requiring 3" pin end blades. Fine, regular teeth for smooth finish. Narrow width for tight turning.	Recommended: Softwood 1/2"-3/4", Veneer/Thin Wood. Can use: Hardwood 1/2"-3/4", Plastic 1/2"-3/4".
FR43001	--	3"	0.15	0.015	15	Pin End	medium	General purpose cutting of wood and plastic. For hobby scroll saws requiring 3" pin end blades. For machines requiring 3" pin end blades. Regular teeth for general cutting.	Recommended: Softwood 1/2"-3/4". Can use: Hardwood 1/2"-3/4", Plywood, Plastic 1/2"-3/4".
FR10250	--	4"	0.074	0.01	25	Pin End	smooth	Cuts in hard/soft wood and plastic. For Dremel Moto-Saw and similar small scroll saws. For Dremel Moto-Saw and machines requiring 4" (3.9" between pins) pin end blades. Regular tooth for smooth finish.	Recommended: Softwood 1/2"-3/4". Can use: Hardwood 1/2"-3/4", Veneer/Thin Wood, Plastic 1/2"-3/4".
SC18150	--	4"	0.094	0.018	15	Pin End	medium	Wallboard, pressed wood, felt, paper, bone, lead. For Dremel Moto-Saw and similar small scroll saws. For Dremel Moto-Saw and machines requiring 4" (3.9" between pins) pin end blades. Regular tooth.	Recommended: Softwood 1/2"-3/4". Can use: Hardwood 1/2"-3/4", Plywood, Plastic 1/2"-3/4".
FR42701	--	5"	0.07	0.01	25	Pin End	smooth	Regular style teeth for fine cuts in wood and plastic. For machines requiring 5" pin end blades. Perfect for Sears Craftsman, Penn State, Delta, Ryobi, and all 15" and 16" imported scroll saws.	Recommended: Softwood 1/2"-3/4". Can use: Hardwood 1/2"-3/4", Veneer/Thin Wood, Plastic 1/2"-3/4".
SC40501	--	5"	0.1	0.018	20	Pin End	medium	Regular style teeth for thin cuts in wood and plastic. For machines requiring 5" pin end blades. Perfect for Sears Craftsman, Penn State, Delta, Ryobi, and all 15" and 16" imported scroll saws.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood. Can use: MDF, Plastic 1/2"-3/4".
SC41101	--	5"	0.1	0.018	15	Pin End	medium	General purpose, regular style teeth for wood and plastic. For machines requiring 5" pin end blades. Perfect for Sears Craftsman, Penn State, Delta, Ryobi, and all 15" and 16" imported scroll saws.	Recommended: Softwood 1/2"-3/4", Plywood, MDF. Can use: Hardwood 1/2"-3/4", Softwood to 1-1/2", Particle Board, Plastic 1/2"-3/4".
SC41201	--	5"	0.1	0.018	10	Pin End	medium	Regular style teeth for fast cutting of wood and plastic. For machines requiring 5" pin end blades. Perfect for Sears Craftsman, Penn State, Delta, Ryobi, and all 15" and 16" imported scroll saws.	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood, MDF. Can use: Softwood to 1-1/2", Particle Board, Plastic 1/2"-3/4".

Spiral Scroll Saw Blades

SKU	Universal #	Length	Width (in)	Thickness (in)	TPI	End Type	Finish	Application & Features	Materials
SP46100	0	5"	—	—	46	Plain	medium	Bevel cut letters, medium finish fretwork, workpieces too large to turn. Saws in ALL directions with 360 degree cutting capability! No need to turn the workpiece. Great for bevel cutting letters and numbers. Kerf: .032"	Recommended: Softwood 1/2"-3/4". Can use: Hardwood 1/2"-3/4", Veneer/Thin Wood, Plywood, Plastic 1/2"-3/4", Non-Ferrous Metal.
SP46300	2	5"	—	—	41	Plain	medium	Medium speed and finish of hard/soft wood, plaster, wallboard. Saws in ALL directions with 360 degree cutting capability! Kerf: .035"	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood. Can use: Softwood to 1-1/2", Veneer/Thin Wood, MDF, Plastic 1/2"-3/4", Non-Ferrous Metal.
SP46500	4	5"	—	—	36	Plain	medium	Faster cutting of hard/soft wood and plastic 1/4" or thicker. Saws in ALL directions with 360 degree cutting capability! Kerf: .041"	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF. Can use: Hardwood to 1-1/2", Particle Board, Plastic 1/2"-3/4", Non-Ferrous Metal.

Flat End Spiral Scroll Saw Blades

SKU	Universal #	Length	Width (in)	Thickness (in)	TPI	End Type	Finish	Application & Features	Materials
SP46800	2	5"	—	—	41	Flat End	medium	Medium speed and finish of hard/soft wood, plaster, wallboard. Same as spiral but with flat ends for easier blade installation and retention. Kerf: .035"	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Plywood. Can use: Softwood to 1-1/2", Veneer/Thin Wood, MDF, Plastic 1/2"-3/4", Non-Ferrous Metal.
SP46900	4	5"	—	—	36	Flat End	medium	Faster cutting of hard/soft wood and plastic. Same as spiral but with flat ends for easier blade installation and retention. Kerf: .041"	Recommended: Hardwood 1/2"-3/4", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF. Can use: Hardwood to 1-1/2", Particle Board, Plastic 1/2"-3/4", Non-Ferrous Metal.

Thick Wood Hook Scroll Saw Blades

SKU	Universal #	Length	Width (in)	Thickness (in)	TPI	End Type	Finish	Application & Features	Materials
FR40800	--	5"	0.08	0.018	7 Hook	Plain	medium	Thick wood up to 2" without burning! Extra wide gullets for rapid cutting of solid hard/soft wood and multi-layers from 3/4" up to 2" thick without burning. Continuous teeth provide additional blade strength.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board.
FR41001	--	5"	0.1	0.018	7 Hook	Pin End	medium	Thick wood up to 2" without burning! For pin end scroll saws. Hook teeth for aggressive cutting of wood up to 2" thick. For machines requiring 5" pin end blades.	Recommended: Hardwood 1/2"-3/4", Hardwood to 1-1/2", Softwood 1/2"-3/4", Softwood to 1-1/2", Plywood, MDF, Particle Board.

Olson Coping Saw Blades

Olson coping saw blades are 6-1/2 inches long between pins and fit all standard coping saw frames. Hardened and tempered steel for precise sawing of wood, plastic, copper, and other soft metals.

SKU	Length	Width (in)	Thickness (in)	TPI	Finish	Application & Features
CP301	6-1/2"	0.094	0.018	16 Skip	Fine	Fine, skip teeth for rapid chip removal. Narrow width for tight turning. Skip tooth style with fine teeth. For precise sawing of wood, plastic, copper, and other soft metals.
CP302	6-1/2"	0.094	0.02	18	Fine	Fine, regular teeth for smooth finish. Narrow width for tight turning. Regular tooth style with fine teeth. For precise sawing of wood, plastic, copper, and other soft metals.
CP303	6-1/2"	0.125	0.02	20	Fine	Fine teeth for a smooth finish. Narrow width for tight turning. Regular tooth style. For precise sawing of wood, plastic, copper, and other soft metals.
CP304	6-1/2"	0.125	0.02	15	Medium	Most common coping saw blade. General purpose cutting. The most popular coping saw blade. Good all-around performance for wood, plastic, and soft metals.
CP306	6-1/2"	0.125	0.02	10	Coarse	Coarse, fast cutting of thicker materials. Coarse tooth for aggressive, fast cutting. Best for thicker stock where speed is more important than finish quality.
CP308	6-1/2"	0.09	0.018	24	Extra Fine	Extra fine teeth for smooth finish. Extra narrow for tight turning. Finest teeth available in a coping saw blade. For the smoothest finish and tightest radius cuts.

Olson Jewelers & Mini Hack Saw Blades

Jewelers metal piercing blades in sizes 3/0 through 4 for hand-held jewelers saw frames, plus mini hack saw blades for junior hack saw frames.

SKU	Type	Universal #	Length	Width (in)	Thickness (in)	TPI	Application & Features
JW47500	Metal Piercing	3/0	5"	0.019	0.0095	61	Finest cuts in metal and hardened materials. For hand-held jewelers saw frames only. Premium quality hardened and tempered steel. Regular teeth. The finest available size for extremely delicate work.
JW47600	Metal Piercing	2/0	5"	0.02	0.01	56	Very fine cuts in metal and hardened materials. Premium quality hardened and tempered steel. Regular teeth.
JW47800	Metal Piercing	0	5"	0.022	0.01	51	Fine cuts in metal and hardened materials. Premium quality hardened and tempered steel. Regular teeth.
JW47900	Metal Piercing	1	5"	0.024	0.012	48	Fine to medium cuts in metal and hardened materials. Premium quality hardened and tempered steel. Regular teeth.
JW48000	Metal Piercing	2	5"	0.028	0.013	43	Medium cuts in metal and hardened materials. Premium quality hardened and tempered steel. Regular teeth.
JW48100	Metal Piercing	3	5"	0.03	0.014	41	Medium to coarse cuts in metal and hardened materials. Premium quality hardened and tempered steel. Regular teeth.
JW48200	Metal Piercing	4	5"	0.031	0.015	38	Coarser cuts in metal and hardened materials. Largest jewelers blade size. Premium quality hardened and tempered steel. Regular teeth. The largest standard jewelers blade size.
MH63602BL	Mini Hack - Wood	--	5-3/4"	0.25	0.015	15	For cutting hard and soft wood. Fits junior hack saw frames. Wood cutting blade for junior hack saws. Compact for easy portability and storage in tool box or glove compartment.
MH63603BL	Mini Hack - Metal	--	5-3/4"	0.25	0.015	32	General purpose cutting of metal and plastic. Medium smooth finish. Metal and plastic cutting blade for junior hack saws. Compact for easy portability.

Shop Olson Blades by SKU

Scroll Saw Blades

PG45502 — PGT Skip/Reverse #5RG, 5" Plain end: 6-Pack (PG45502) · 12-Pack (PG455DZ) · 144-Pack (PG455GR)
PG45702 — PGT Skip/Reverse #7RG, 5" Plain end: 6-Pack (PG45702) · 12-Pack (PG457DZ) · 144-Pack (PG457GR)
PG45902 — PGT Skip/Reverse #9RG, 5" Plain end: 6-Pack (PG45902) · 12-Pack (PG459DZ) · 144-Pack (PG459GR)
PG49502 — PGT Double/Reverse #5RG, 5" Plain end: 6-Pack (PG49502) · 12-Pack (PG495DZ) · 144-Pack (PG495GR)
PG49702 — PGT Double/Reverse #7RG, 5" Plain end: 6-Pack (PG49702) · 12-Pack (PG497DZ) · 144-Pack (PG497GR)
PG49902 — PGT Double/Reverse #9RG, 5" Plain end: 6-Pack (PG49902) · 12-Pack (PG499DZ) · 144-Pack (PG499GR)
FR64302 — Mach Speed #3R, 5" Plain end: 12-Pack (FR64302) · 144-Pack (FR643RGR)
FR64502 — Mach Speed #5R, 5" Plain end: 12-Pack (FR64502) · 144-Pack (FR645RGR)
FR64702 — Mach Speed #7R, 5" Plain end: 12-Pack (FR64702) · 144-Pack (FR647RGR)
FR64902 — Mach Speed #9R, 5" Plain end: 12-Pack (FR64902) · 144-Pack (FR649RGR)
CT62000 — Crown Tooth #2/0, 5" Plain end: 12-Pack (CT62000) · 144-Pack (CT620GR)
CT62200 — Crown Tooth #2, 5" Plain end: 12-Pack (CT62200) · 144-Pack (CT622GR)
CT62300 — Crown Tooth #3, 5" Plain end: 12-Pack (CT62300) · 144-Pack (CT623GR)
CT62500 — Crown Tooth #5, 5" Plain end: 12-Pack (CT62500) · 144-Pack (CT625GR)
CT62700 — Crown Tooth #7, 5" Plain end: 12-Pack (CT62700) · 144-Pack (CT627GR)
CT62900 — Crown Tooth #9, 5" Plain end: 12-Pack (CT62900) · 144-Pack (CT629GR)
CT63200 — Crown Tooth #12, 5" Plain end: 12-Pack (CT63200) · 144-Pack (CT632GR)
FR44002 — Reverse Tooth #2/0R, 5" Plain end: 12-Pack (FR44002) · 144-Pack (FR440RGR)
FR44302 — Reverse Tooth #2R, 5" Plain end: 12-Pack (FR44302) · 144-Pack (FR443RGR)
FR44602 — Reverse Tooth #5R, 5" Plain end: 12-Pack (FR44602) · 144-Pack (FR446RGR)
FR44802 — Reverse Tooth #7R, 5" Plain end: 12-Pack (FR44802) · 144-Pack (FR448RGR)
FR45002 — Reverse Tooth #9R, 5" Plain end: 12-Pack (FR45002) · 144-Pack (FR450RGR)
FR45302 — Reverse Tooth #12R, 5" Plain end: 12-Pack (FR45302) · 144-Pack (FR453RGR)
FR42002 — Reverse Tooth, 5" Plain end: 12-Pack (FR42002) · 144-Pack (FR420RGR)
FR40000 — Skip Tooth #3/0, 5" Plain end: 12-Pack (FR400-DZ) · 144-Pack (FR400GR)
FR44000 — Skip Tooth #2/0, 5" Plain end: 12-Pack (FR440-DZ) · 144-Pack (FR440GR)
FR44300 — Skip Tooth #2, 5" Plain end: 12-Pack (FR443-DZ) · 144-Pack (FR443GR)
FR44500 — Skip Tooth #4, 5" Plain end: 12-Pack (FR445DZ) · 144-Pack (FR445GR)
FR44600 — Skip Tooth #5, 5" Plain end: 12-Pack (FR446-DZ) · 144-Pack (FR446GR)
FR44800 — Skip Tooth #7, 5" Plain end: 12-Pack (FR448DZ) · 144-Pack (FR448GR)
FR45000 — Skip Tooth #9, 5" Plain end: 12-Pack (FR45000) · 144-Pack (FR450GR)
FR45300 — Skip Tooth #12, 5" Plain end: 12-Pack (FR453DZ) · 144-Pack (FR453GR)
FR410DZ — Skip Tooth, 5" Plain end: 12-Pack (FR410DZ) · 144-Pack (FR410GR)
DT43200 — Double Tooth #3/0, 5" Plain end: 12-Pack (DT43200) · 144-Pack (DT432GR)
DT43300 — Double Tooth #2/0, 5" Plain end: 12-Pack (DT43300) · 144-Pack (DT433GR)
DT43400 — Double Tooth #1, 5" Plain end: 12-Pack (DT43400) · 144-Pack (DT434GR)
DT43500 — Double Tooth #3, 5" Plain end: 12-Pack (DT43500) · 144-Pack (DT435GR)
DT43600 — Double Tooth #5, 5" Plain end: 12-Pack (DT43600) · 144-Pack (DT436GR)
DT43700 — Double Tooth #7, 5" Plain end: 12-Pack (DT43700) · 144-Pack (DT437GR)
DT43800 — Double Tooth #9, 5" Plain end: 12-Pack (DT43800) · 144-Pack (DT438GR)
DT43900 — Double Tooth #12, 5" Plain end: 12-Pack (DT43900) · 144-Pack (DT439GR)
SC402DZ — Regular Tooth, 5" Plain end: 12-Pack (SC402DZ) · 144-Pack (SC402GR)
SC403DZ — Regular Tooth, 5" Plain end: 12-Pack (SC403DZ) · 144-Pack (SC403GR)
SC405DZ — Regular Tooth, 5" Plain end: 5" 12-Pack (SC405DZ) · 5" 144-Pack (SC405GR) · 6" 12-Pack (SC405-6DZ) · 6" 144-Pack (SC405-6GR)
SC406DZ — Regular Tooth, 5" Plain end: 12-Pack (SC406DZ) · 144-Pack (SC406GR)
SC411DZ — Regular Tooth, 5" Plain end: 5" 12-Pack (SC411DZ) · 5" 144-Pack (SC411GR) · 6" 12-Pack (SC411-6DZ) · 6" 144-Pack (SC411-6GR)
SC412DZ — Regular Tooth, 5" Plain end: 5" 12-Pack (SC412DZ) · 5" 144-Pack (SC412GR) · 6" 12-Pack (SC412-6DZ) · 6" 144-Pack (SC412-6GR)
SC413DZ — Regular Tooth, 5" Plain end: 5" 12-Pack (SC413DZ) · 5" 144-Pack (SC413GR) · 6" 12-Pack (SC413-6DZ) · 6" 144-Pack (SC413-6GR)
SC414DZ — Regular Tooth, 5" Plain end: 12-Pack (SC414DZ) · 144-Pack (SC414GR)
SP46100 — Spiral #0, 5" Plain end: 12-Pack (SP46100) · 144-Pack (SP461GR)
SP46300 — Spiral #2, 5" Plain end: 12-Pack (SP46300) · 144-Pack (SP463GR)
SP46500 — Spiral #4, 5" Plain end: 12-Pack (SP46500) · 144-Pack (SP465GR)
SP46800 — Flat End Spiral #2, 5" Flat End end: 12-Pack (SP46800) · 144-Pack (SP468GR)
SP46900 — Flat End Spiral #4, 5" Flat End end: 12-Pack (SP46900) · 144-Pack (SP469GR)
FR40800 — Thick Wood Hook, 5" Plain end: 12-Pack (.018) (FR408DZ) · 12-Pack (.014) (FR407DZ) · 144-Pack (.018) (FR408GR) · 144-Pack (.014) (FR407GR)
SC405-6DZ — Regular Tooth, 6" Plain end: 12-Pack (SC405-6DZ) · 144-Pack (SC405-6GR)
SC411-6DZ — Regular Tooth, 6" Plain end: 12-Pack (SC411-6DZ) · 144-Pack (SC411-6GR)
SC412-6DZ — Regular Tooth, 6" Plain end: 12-Pack (SC412-6DZ) · 144-Pack (SC412-6GR)
SC413-6DZ — Regular Tooth, 6" Plain end: 12-Pack (SC413-6DZ) · 144-Pack (SC413-6GR)
SC429PDZ — Regular Tooth, 3" Pin End end: 12-Pack (SC429PDZ) · 144-Pack (SC429PGR)
FR42901 — Skip Tooth, 3" Pin End end: 6-Pack (FR42901) · 12-Pack (FR429PDZ) · 144-Pack (FR429PGR)
FR43001 — Regular Tooth, 3" Pin End end: 6-Pack (FR43001) · 12-Pack (FR430PDZ) · 144-Pack (FR430PGR)
FR10180 — Skip Tooth, 4" Pin End end: 6-Pack (FR10180) · 12-Pack (FR10180DZ) · 144-Pack (FR10180GR)
FR10250 — Regular Tooth, 4" Pin End end: 6-Pack (FR10250) · 12-Pack (FR10250DZ) · 144-Pack (FR10250GR)
SC18150 — Regular Tooth, 4" Pin End end: 6-Pack (SC18150) · 12-Pack (SC18150DZ) · 144-Pack (SC18150GR)
FR42401 — Skip Tooth, 5" Pin End end: 6-Pack (FR42401) · 12-Pack (FR424PDZ) · 144-Pack (FR424PGR)
FR42701 — Regular Tooth, 5" Pin End end: 6-Pack (FR42701) · 12-Pack (FR427PDZ) · 144-Pack (FR427PGR)
SC40501 — Regular Tooth, 5" Pin End end: 6-Pack (SC40501) · 12-Pack (SC405PDZ) · 144-Pack (SC405PGR)
FR41001 — Thick Wood Hook, 5" Pin End end: 6-Pack (FR41001) · 12-Pack (FR410PDZ) · 144-Pack (FR410PGR)
SC41101 — Regular Tooth, 5" Pin End end: 6-Pack (SC41101) · 12-Pack (SC411PDZ) · 144-Pack (SC411PGR)
SC41201 — Regular Tooth, 5" Pin End end: 6-Pack (SC41201) · 12-Pack (SC412PDZ) · 144-Pack (SC412PGR)
FR42003 — Reverse Tooth, 5" Pin End end: 6-Pack (FR42003) · 12-Pack (FR420RPDZ) · 144-Pack (FR420RPGR)

Coping Saw Blades

CP301 — Fine finish, 16 Skip TPI: 4-Pack (CP30100BL) · 12-Pack (CP301DZ) · 144-Pack (CP301GR)
CP302 — Fine finish, 18 TPI: 4-Pack (CP30200BL) · 12-Pack (CP302DZ) · 144-Pack (CP302GR)
CP303 — Fine finish, 20 TPI: 4-Pack (CP30300BL) · 12-Pack (CP303DZ) · 144-Pack (CP303GR)
CP304 — Medium finish, 15 TPI: 4-Pack (CP30400BL) · 12-Pack (CP304DZ) · 144-Pack (CP304GR)
CP306 — Coarse finish, 10 TPI: 4-Pack (CP30600BL) · 12-Pack (CP306DZ) · 144-Pack (CP306GR)
CP308 — Extra Fine finish, 24 TPI: 4-Pack (CP30800BL) · 12-Pack (CP308DZ) · 144-Pack (CP308GR)

Jewelers & Mini Hack Blades

JW47500 — Metal Piercing #3/0: 12-Pack (JW47500) · 144-Pack (JW475GR)
JW47600 — Metal Piercing #2/0: 12-Pack (JW47600) · 144-Pack (JW476GR)
JW47800 — Metal Piercing #0: 12-Pack (JW47800) · 144-Pack (JW478GR)
JW47900 — Metal Piercing #1: 12-Pack (JW47900) · 144-Pack (JW479GR)
JW48000 — Metal Piercing #2: 12-Pack (JW48000) · 144-Pack (JW480GR)
JW48100 — Metal Piercing #3: 12-Pack (JW48100) · 144-Pack (JW481GR)
JW48200 — Metal Piercing #4: 12-Pack (JW48200) · 144-Pack (36-482GR)
MH63602BL — Mini Hack - Wood: 3-Pack (MH63602BL)
MH63603BL — Mini Hack - Metal: 3-Pack (MH63603BL)