Seriously committed enough to one blade to buy 144 of them? We offer bulk packages scroll saw blades in polybags.

View or download

Scroll Saw Blade Selection Chart to compare blades.

Manufacturing Dynamics of Scroll Saw Blades by Chuck Olson.

Olson’s Band and Scroll Saw Blade Catalog(2.7MB).

Showing 1–16 of 17 results

  • Skip Tooth Scroll Saw Blades 5″ long

    $44.01 – $49.11

    144 same spec blades per pack. 5-in. Skip tooth blades are available in a range from the finest 40000 (#3/0) size to the 410DZ for coarser sawing of thicker materials. For hand or machine sawing of wood, plastic, and fibrous materials. Skip tooth blades cut fast, provide good chip clearance, and smooth finishes. Chart has more info.

    For Cutting Metal Skip Tooth Scroll Saw Blades may out- perform metal cutting or jewelers piercing scroll saw blades in cutting metal. Any Skip Tooth blade up through a Universal No. 5 will cut metal but Universal No. 3/0 to Univ. No. 2 is preferred for inside cuts and marquetry panels. Skip Tooth blades can cut cold rolled steel, copper, brass, aluminum sheet and bronze. Soft metal up to 1/8in. thick can be cut easily, whether a single sheet of stock or several thinner sheets in a stack.

    Select options

  • PGT® Precision Ground Tooth
    Skip Reverse 5″ Long

    $66.41

    144-pack of same spec blades. 5in. long, plain end Precision Ground Tooth – PGT® Scroll Saw Blades are the best blades available! Tested and endorsed by experts, PGT blades outperform and outlast all other blades. Their razor sharp teeth cut faster, smoother, and more accurately in both straight and radius cuts. A unique tooth geometry and widely spaced gullets minimize burning and provide rapid chip removal. They are made of the finest carbon steel for maximum strength, durability and longest blade life.  Chart has more info.

    Select options
  • PGT® Precision Ground Double Reverse Tooth 5-in. long

    PGT® Precision Ground Tooth
    Double Reverse 5″ Long

    $66.41

    Double tooth for top performance in hardwoods! 144 same spec blades per pack. Precision Ground Tooth PGT® Scroll Saw Blades are the best blades available! Tested and endorsed by experts, PGT blades outperform and outlast all other blades. Double tooth are easy to distinguish from skip tooth having two teeth together followed by a flat space for more efficient chip removal. Their razor sharp teeth cut faster, smoother, and more accurately in both straight and radius cuts. A unique tooth geometry and widely spaced gullets minimize burning. Made of the finest carbon steel for maximum strength, durability and longest blade life. Click on the chart for more info.

    Select options

  • Spiral Scroll Saw Blades 5″ Long

    $48.57

    144 same spec blades per pack. Spiral Tooth blades saw in all directions with 360º cutting capability. Excellent for 0º radius scroll/fret work – you never have to turn the workpiece. For cutting wood, plastic, wax, non-ferrous metals, plaster, bone, horn, etc. For use in power scroll saws and hand-held fret and jewelers saw frames. (Note: You can use spiral blades on non-ferrous metals but if you look at the entire Scroll Saw Blade Selection Chart you can see that Skip Tooth, PGT and Mach blades are the blades recommended for non-ferrous metal.) Cutting speed and finish depend on material thickness and number of teeth per inch. These premium blades are made of high carbon steel, hardened and tempered to stay sharp longer. Good for bevel cutting letters in names. Increase throat capacity and cut longer pieces without turning. Chart has blade recommendations.

     

     

    Select options

  • Flat End Spiral Scroll Saw Blades 5″ Long

    $59.28

    144 same spec blades per pack. Spiral Tooth Blades with Flat Ends for easier blade installation and retention. Saw in all directions with 360º cutting capability. Excellent for 0º radius scroll/fret work – you never have to turn the workpiece. Cuts wood, plastic, wax, non-ferrous metals, plaster, bone, horn, etc. (Note: You can use spiral blades on non-ferrous metals but if you look at the entire Scroll Saw Blade Selection Chart you can see that Skip Tooth, PGT and Mach blades are the blades recommended for non-ferrous metal.)  For use in power scroll saws and hand-held fret and jewelers saw frames. Cutting speed and finish depend on material thickness and number of teeth per inch. These premium blades are made of high carbon steel, hardened and tempered to stay sharp longer. Good for bevel cutting letters in names. Increase throat capacity and cut longer pieces without turning! Chart has more info.

    Select options

  • Mach Speed™ Scroll Saw Blades 5″ Long

    $55.91

    5in. long, plain end with reverse teeth that cut on the upstroke and minimize underside tearout. 144 same spec per pack. Precision milled blades with wide spaced, ultra sharp teeth for fast, accurate cuts in hard and soft woods. Widely spaced gullets minimize burning and provide rapid chip removal. Position blade with reverse teeth in bottom blade holder. 2 – 5 teeth should appear above the table surface to score the work piece on the upstroke. Adjust feed pressure to prevent burning. Chart has more info.

    Select options

  • Regular Tooth Scroll Saw Blades 5″ long

    $51.17
    Select options

  • Reverse Tooth Scroll Saw Blades 5″ long

    $49.11 – $53.10

    144 same spec blades per pack. Reverse Tooth blades have the same performance as our skip tooth blades with the added benefit of reverse teeth for a smooth, splinter free finish on top and bottom surfaces. Excellent blade for eliminating tear-out on birch and maple plywood. Chart has more info.

    SKUs: FR440RGR – FR443RGR – FR446RGR – FR448RGR – FR450RGR – FR453RGR – FR420RGR

    Select options
  • Crown Tooth™ Scroll Saw Blades 5-in. long

    Crown Tooth™ Scroll Saw Blades 5″ Long

    $55.91

    144 same spec blades per pack. Unique tooth design allows the blade to cut on both the up and down stroke. Cuts a little slower for more control, useful in delicate fretwork. Finish is smooth with clean, sharp, splinter-free edges in hard/soft wood, plywood, plastic and Corian®. Two-way cutting action prevents melting behind the cut in most plastic including acrylic, lexan (polycarbonate), fiberglass, and plexiglas. Has no top or bottom for easy blade installation. Blade can be turned over for a fresh new set of teeth. Click on the chart for more info.

    Select options
  • 5-in. Pin End Blades 144 per pack

    5″ Pin End Blades 144 per pack

    $65.44 – $68.95

    144-pc. bulk packs of same spec. Pin End 5″ blades. Select Teeth per Inch, and Tooth style from menu. For machines that require 5in. pin end blades. Perfect for Sears Craftsman, Penn State, Delta, Ryobi, all 15in. and 16in. imported scroll saws. Chart has recommendations and descriptions.

     

    Select options
  • 4-inch Pin End Blades for new Dremel® Moto Saw™ 144 per pack

    4″ Pin End Blades for new Dremel® Moto Saw™ 144/pk

    $115.11

    Now available in packs of 144 blades! Choose Regular or Skip Tooth styles and various Teeth per Inch. For machines that require 4in. pin end blades – or 3.9 inches between pins. Perfect for the NEW Dremel® Moto Saw™ scroll saws.

    SC1815GR – FR1025GR – FR1018GR

    Recommendations: FR10180GR is best for thin cuts in wood and plastic.

    FR10250GR is best for cuts in hard or soft wood and plastic.

    SC18150GR is best if you are cutting wallboard, pressed wood, felt paper, bone, lead, and other softer more fibrous materials.

    Select options
  • 3-in. Pin End Blades 144 per pack

    3-in. Pin End Blades 144 per pack

    $65.44

    3-in. Pin End Blades 144-pc. bulk packs of same spec. blades. Select Teeth per Inch, and Tooth style from menu above. 3″ Pin End Hobby Blades measure 2-3/4″ between pins and are available with regular or skip teeth. They are used on Dremel® MotoSaw-(the older models), Sears Craftsman® Hobby Scroll Saw, Delta 15″ Hobby Scroll Saw and Emco Lux Hobby Saw to cut wood, plastic and thin mild metals and provide a medium smooth finish. Teeth Per Inch vary from the most coarse- 15TPI, to the finest- 25TPI. SC429PGR – FR429PGR – FR430PGR

    Select options

  • Regular Tooth Scroll Saw Blades 6″ long

    $57.22

    144 same spec blades per pack. 6″ blades are for use in scroll saws with a longer stroke – over 1-1/4″ and for cutting stock more than 2″ thick. Regular Tooth for precise internal and external cutting of irregular shapes and straight cut off applications in all types of sheet materials with a medium smooth finish.

     

    SKUs: SC405-6GR – SC411-6GR – SC412-6GR – SC413-6GR

    Select options

  • Thick Wood Hook Tooth Scroll Saw Blades 5″ long

    $49.11

    144 same spec blades per pack. Blades have extra wide gullets for rapid cutting of solid hard/soft wood and multi-layers from 3/4in. up to 2in. thick without burning! Hardened and tempered teeth for extra blade life. Straight cuts or tight turns. Leaves a medium smooth finish. Continuous teeth (end to end) provide additional blade strength during tensioning process (eliminates distortion) to assure accurate cuts and minimum blade breakage. Every tooth set. Click on the chart for material recommendations!

    Skus include: FR407GR – FR408GR

    Select options

  • Flat Wire Fret Saw 13-3/4″ cutting depth

    $20.55

    SKU: SF63507  An excellent saw for detailed marquetry and scroll  work where great depth is required. Uses 5″ fret, plain end scroll, jewelers, and spiral saw blades. Rigid, flat wire frame keeps blades taut for pull or down stroke sawing. Handle can be folded
    between frame ends for storage. Does NOT include a blade. 

    Plain End Scroll Saw Blades

    Here is a video

    Add to cart

  • Double Tooth Scroll Saw Blades 5″ Long

    $44.01

    144 same spec blades per pack. Preferred by many scroll saw users. Double Tooth blades are distinguished from regular skip tooth fret saw blades as having two teeth together followed by a flat space for efficient chip removal. Double tooth blades cut fast, leaving clean edges in wood and plastic. Chart has more info. The 43200 is considered the best blade for cutting wood veneer!

     

    Select options