Showing all 9 results

  • Safety Kit



    due to respirator all other products are available eparately

    Excellent group of products to help stay safe while using both hand and power tools.
    Includes items from 3M and safety glasses:

    • A-6102 Roll of Vetrap tape – Protects fingers during close work with sharp instruments. Self-adhering tape is easy to apply and requires no pins, clips or adhesive to secure it. Tape won’t loosen over time and stays in place until removed. Re-positionable, doesn’t stick to hair or skin, only to itself. 2″ wide x 15‘ long.
    • A-6103 3M Soft Foam Ear Plugs (3-Pack) -Made of hypo-allergenic materials and have a tapered cone shape for a good fit and comfort. Plastic cord prevents tangling.
    • A-6106 3M Particulate Respirators (3-Pack) – fit a wide range of face sizes. A three-panel respirator with low profile design folds flat has Cool FlowTM Exhalation Valve for work in heat and humidity. Comfortable, lightweight and convenient.
    • A-SG3 Safety Glasses Clear polycarbonate glasses with contemporary style and unitary lens design. Temples are length adjustable with slotted ends. Comes with neck cord.
  • Sanding Sticks -  1/2 or 1 wide

    Sanding Sticks – 1/2″ or 1″ wide

  • Sandpaper Holders, choice of round or square


    Foredom’s Sandpaper Holders are made of lightweight aluminum with plastic coated handles. Choose from round or square shape to hold sanding paper, cloth, or other abrasive paper. 3M Micron Graded Wet/Dry Polishing Papers cut into smaller sheets work well (for fine polishing on smooth surfaces).
    Ideal for sanding, filing and polishing small or concave workpieces. Hinged at the end, each can hold abrasive sheets that are 1-1/2″ x 3-3/4″. After opening the hinge, wrap the sheet around the stick, tuck the ends inside and close the hinge to hold the abrasive surface in place.

    Select from Product Options for round or square contour:

  • Zona Finger Sanders 3/4 or 1-1/2 wide

    Finger Sanders 3/4″ and 1-1/2″ wide


    Zona’’s spring-loaded finger sanders have a unique shape for preparing both curved and straight surfaces. Both come with 320 grit sandpaper.

    37-790 takes a 3/4″ wide sandpaper band and is 5-1/4″ long

    37-795 takes a 1-1/2″ wide sandpaper band and is 5-1/2″ long

    37-794 includes both the sanders listed above plus eight additional sandpaper bands: 2-each of 150 and 320 grit in widths for each of the two sanders.

    Read or download SDS/MSDS sheet on the abrasives used to make these products.

  • Flat Wire Fret Saw 13-3/4″ cutting depth


    SKU: SF63507  An excellent saw for detailed marquetry and scroll  work where great depth is required. Uses 5″ fret, plain end scroll, jewelers, and spiral saw blades. Rigid, flat wire frame keeps blades taut for pull or down stroke sawing. Handle can be folded
    between frame ends for storage. Does NOT include a blade. 

    Plain End Scroll Saw Blades

    Here is a video

  • On/Off Momentary Foot Switch


    Foredom® Foot Switch to turn on and off scroll saws, drill presses or other stationary power tools without using hands. Has 18in. cord for attaching to power tool and 6’ cord with 3-prong grounded plug for attaching to wall outlet. Rated for 110/130V, 1/4 HP, 10 Amp Max.

  • Saw Blade Lubricant Stick

    Saw Blade Lubricant Stick AC70010


    8″ long x 1″ diameter. Prolongs blade life and produces smoother and quicker cuts. Specially compounded to keep metal, plastic, and wood cutting blades from clogging with wood chips or pitch. Use on all power and hand held cutting tools including band, scroll, circular, hack and jewelers saw blades. View or download SDS/MSDS sheet on this product.


  • Scroll Saw Conversion Kit AC49610


    This kit converts most 16in. scroll saws to accept both plain end and pin end blades! Easy to Install. An instructional video and list of 16in. scroll saws that will fit are listed below.
    Contains all hardware and tools needed for installation. View or print Olson’s Conversion Kit Instructions.

  • Saw Blade Finishing Stone

    Saw Blade Finishing Stone AC70013


    For improved finish and blade performance. Lay the side of the wood handle on the table surface and place the silicon carbide stone against the back of the blade to round off the edges and correct weld misalignment. No lubricant needed.

    View or print Instructions and safety tips.

    View or print SDS/MSDS sheets on abrasives in the finishing stone.